| Name | Shao-Kang Hung |
|---|---|
| skhung@mail.nctu.edu.tw | |
| Status | Core |
| Title | Associate Professor |
| Phone | 886-3-5712121 Ext.55115 |
| Office | Room 476, Engineering Building 5 |
| Web Page | http://www.cc.nctu.edu.tw/~skhung |
| Laboratory | Room 410, Engineering Building 5 |
| Division | Design-Manufacturing Engineering |
| Teaching Area | Nanopositioner Precision Measurement Utilizing DVD Pick-up-head Maglev System Robotics Green Vehicle |
| Research Expertise | Technology of Scanning Probe Microscopy Mechatronics Nano Measurement and Instrumentation Mechanical Design Automatic Control |
| Country | School Name | Department | Degree | Duration |
|---|---|---|---|---|
| Taiwan | National Taiwan Univ. | Electrical Engineering | Ph.D. | 2002.09 ~ 2007.06 |
| Taiwan | National Taiwan Univ. | Mechanical Engineering | MS | 1998.09 ~ 2000.06 |
| Taiwan | National Taiwan Univ. | Mechanical Engineering | BS | 1994.09 ~ 1998.06 |
| Organization Title | Department | Job Title | Duration |
|---|---|---|---|
| 2016.08 ~ Up to today | |||
| 2008.08 ~ 2016.07 | |||
| Academia Sinica | Institute of Physics | Postdoc | 2007.07 ~ 2008.07 |
| National Taipei Univ. of Technology | Dept. of ME | lecturer | 2006.02 ~ 2006.07 |
| Angs NanoTek Co., Ltd. | R&D Manager | 2005.05 ~ 2006.12 | |
| Academia Sinica | Institute of Physics | Research Assistant | 2000.10 ~ 2005.04 |
| Year | Project Title | Participator | Job Title | Period | Unit |
|---|---|---|---|---|---|
| 2015 | Low parasitic rotation of two-dimensional nano-positioner design (II) | Shao-Kang Hung | PI | 2015.11 ~ 2015.11 | Ministry of science and technology |
| 2014 | Low parasitic rotation of two-dimensional nano-positioner design | Shao-Kang Hung | PI | 2015.11 ~ 2015.11 | Ministry of science and technology |
| 2012 | Micro-Nano Rapid Prototyping | Shao-Kang Hung | PI | 2015.11 ~ 2015.11 | Ministry of science and technology |
| 2011 | Instant Design and Research of Nano Camera (3/3) | Shao-Kang Hung | PI | 2015.11 ~ 2015.11 | Ministry of science and technology |
| 2010 | Design and research of real-time nano-camera (2/3) | Shao-Kang Hung | Principle investigator | 2010.08 ~ 2012.07 | National Science Council |
| 2009 | Design and research of real-time nano-camera (1/3) | Shao-Kang Hung | Principle investigator | 2009.08 ~ 2012.07 | National Science Council |
| 2008 | Design and study of high-speed nanopositioning | Shao-Kang Hung | Principle investigator | 2008.09 ~ 2009.07 | National Science Council |
| Year | Paper Title | Authors | Journal Title | Issue.No |
|---|---|---|---|---|
| 2017 | Paper List of Shao-Kang Hung Prof. on MOST website" target='_blank'>Paper List of Shao-Kang Hung Prof. on MOST website | |||
| 2016 | Total-internal-reflection-based photomask for large-area photolithography | Shao-Kang Hunga, Kung-Hsuan Linb, Cheng-Lung Chena, Chen-Hsun Choua, You-Chuan Lina | Optics & Laser Technology | |
| 2015 | Design and quasi-static characteristics study on a planar piezoelectric nanopositioner with ultralow parasitic rotation | Hung-Ruei Lin, Chiao-Hua Cheng, Shao-Kang Hung | Mechatronics | |
| 2015 | A Piezoelectric 2-Degree-of-Freedom Nano-Stepping MotorWith Parallel Design | Chiao-Hua Cheng and Shao-Kang Hung | IEEE/ASME Transactions on Mechatronics | |
| 2015 | Automatic-Patterned Sapphire Substrate Nanometrology Using Atomic Force Microscope | Shao-Kang Hung, Chiao-Hua Cheng, Cheng-Lung Chen | IEEE TRANSACTIONS ON NANOTECHNOLOGY | 2 |
| 2014 | Transforming an Optical Pick-up-Head into an Accelerometer With UltraHigh Sensitivity | Shao-Kang Hung, Chiao-Hua Cheng, Ming-Li Chiang, and Jih-Wei Chieh | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | 3 |
| 2013 | Influence of TiO2 buffer layer and post-annealing on the quality of Ti-doped ZnO thin films | Y.C. Lin, C.Y. Hsu, S.K. Hung, D.C. Wen | Ceramics International | 5 |
| 2012 | Design and Experiment of a Macro–Micro Planar Maglev Positioning System | Mei-Yung Chen, Tzuo-Bo Lin, Shao-Kang Hung, Li-Chen Fu | IEEE Transactions on Industrial Electronics | 11 |
| 2012 | The structural and optoelectronic properties of Ti-doped ZnO thin films prepared by introducing a Cr buffer layer and post-annealing | Y.C. Lin, C.Y. Hsu, S.K. Hung, C.H. Chang, D.C. Wen | Applied Surface Science | 24 |
| 2011 | Evaluation of the characteristics of the microelectrical discharge machining process using response surface methodology based on the central composite design | Y.C.Lin, C.C.Tsao, C.Y.Hsu, S.K.Hung, D.C.Wen | The International Journal of Advanced Manufacturing Technology | 9 |
| 2011 | Design and Implementation of a New Six-DOF Maglev Positioner With a Fluid Bearing | Mei-Yung Chen; Sheng-Chih Huang; Shao-Kang Hung; Li-Chen Fu | IEEE/ASME Transactions on Mechatronics | 3 |
| 2010 | A New Design of a Submicropositioner Utilizing Electromagnetic Actuators and Flexure Mechanism | Mei-Yung Chen; Hsuan-Han Huang; Shao-Kang Hung | IEEE Transactions on Industrial Electronics | 1 |
| 2010 | Spiral Scanning Method for Atomic Force Microscopy | Hung Shao-Kang | Journal of Nanoscience and Nanotechnology | 7 |
| 2010 | A TEM phase plate loading system with loading monitoring and nano-positioning functions | Shiue Jessie; Hung Shao-Kang | Ultramicroscopy | 9 |
| 2008 | Real-time detection of linear and angular displacements with a modified DVD optical head | Hwu En-Te; Hung Shao-Kang; Yang Chih-Wen; et al | Nanotechnology | 11 |
| 2007 | “A New Mechanism Design of Electromagnetic Actuator for a Micropositioner,” | Mei-Yung Chen, Huan-Wen Tzeng, and Shao-Kang Hung | ISA Transactions | |
| 2007 | “Simultaneous Detection of Translational and Angular Displacements of Micromachined Elements,” | En-Te Hwu, Shao-Kang Hung, Chih-Wen Yang, Kuang-Yuh Huang, and Ing-Shouh Hwang | Applied Physics Letters | |
| 2007 | “Dual-Stage Piezoelectric Nano-Positioner Utilizing a Range-Extended Optical Fiber Fabry-Perot Interferometer,” | Shao-Kang Hung, En-Te Hwu, Mei-Yung Chen, and Li-Chen Fu | IEEE/ASME Transactions on Mechatronics | No. 3 |
| 2006 | “Measurement of the Cantilever Displacement Using a CD/DVD Pickup Head,” | En-Te Hwu, Kuang-Yuh Huang, Shao-Kang Hung, and Ing-Shouh Hwang | Japanese Journal of Applied Physics | No. 3B |
| 2006 | “Postfitting Control Scheme for Periodic Piezoscanner Driving,” | Shao-Kang Hung, En-Te Hwu, Ing-Shouh Hwang, and Li-Chen Fu | Japanese Journal of Applied Physics | No. 3B |
| 2006 | “Novel Three-Dimensional Beam Tracking System for Stationary-Sample Type Atomic Force Microscopy,” | Shao-Kang Hung and Li-Chen Fu | IEEE Transactions on Instrumentation and Measurement | No. 5 |
| Year | Paper Title | Authors | Conference Name | Location |
|---|---|---|---|---|
| 2015 | Optimum electric cable selection for kite-like unmanned aerial vehicle | K. Y. Wang, P. H. Lee, S. K. Hung | 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) | |
| 2014 | Design and analysis of a 2-DOF planar nano-positioner with low parasitic rotation | Hung-Ruei Lin; Shao-Kang Hung; Chiao-Hua Cheng | Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) | |
| 2014 | Design of a dual- probe profilometer | C. H. Cheng, S. K. Hung and C. H. Lin | Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) | |
| 2012 | Automatic assembly of quartz tuning fork and microcantilever | Chiao-Hua Cheng; Jian-Hua Chen; Jen-Yu Shieh; Shao-Kang Hung | Advanced Intelligent Mechatronics (AIM) | |
| 2011 | The design and characteristic research of a dual-mode inertia motor | Chiao-Hua Cheng; Shao-Kang Hung | IEEE/ASME International Conference on Advanced Intelligent Mechatronics (EI) | |
| 2011 | A compact tapping mode AFM with sliding mode controller for precision image scanning | Jun-Wei Wu; Mei-Yung Chen; Shao-Kang Hung | Control Conference (ASCC) | |
| 2010 | A range-extended displacement sensor using a quartz tuning fork | Yi Lu; Chiao-Hua Cheng; Li-Kang Chen; Shao-Kang Hung | EEE/ASME International Conference on Advanced Intelligent Mechatronics | |
| 2010 | The design and characteristic study of a 3-dimensional piezoelectric nano-positioner | Yu-Chi Wang; Li-Kang Chen; Shao-Kang Hung | SICE Annual Conference (EI) | |
| 2009 | Transforming a CD/DVD pick-up-head into an accelerometer | Jih-Wei Chieh; Shao-Kang Hung | IEEE/ASME International Conference on Advanced Intelligent Mechatronics | |
| 2009 | Yi Lu; Chiao-Hua Cheng; Li-Kang Chen; Shao-Kang Hung | Hu Wan-Lin; Hung Shao-Kang; Yen Shih-Hsun; Fu Li-Chen | Asian Control Conference | |
| 2008 | Adaptive Sliding-Mode Control for a Precision Positioner with Hybrid Mechanism | Sheng-Chih Huang, Shao-Kang Hung, Mei-Yung Chen, Chih-Hsien Lin, Li-Chen Fu | 17th IFAC World Congress | |
| 2007 | A Novel Six-DOF Electromagnetic Precision Positioner Utilizing Hybrid Magnetic and Fluid Mechanism | Sheng-Chih Huang; Shao-Kang Hung; Mei-Yung Chen; Chih-Hsien Lin; Li-Chen Fu | Annual Conference of the IEEE on Industrial Electronics Society | |
| 2006 | Measuring the Deflection of the Cantilever in Atomic Force Microscope with an Optical Pickup System,” | Meng-Hu Lin, Shao-Kang Hung, Sheng-Chih Huang, and Li-Chen Fu | Proceedings of Conference on Decision and Control | |
| 2006 | “Design and implementation of a new 3-DOF electromagnetic micropositioner utilizing flexure mechanism,” | Mei-Yung Chen, Hsuan-Han Huang, Shao-Kang Hung; and Li-Chen Fu | Proceedings of American Control Conference | |
| 2006 | “A New Design of 3-DOF Flexure-mechanism Positioner with Electromagnetic Technology,” | Zhao-Kai Wu, Mei-Yung Chen, Shao-Kang Hung, Sheng-Chih Huang, and Li-Chen Fu | Proceedings of Conference on Decision and Control (EI) | |
| 2006 | “Application of DVD Pickup Head on Sub-nano Scale Detection in Scanning Probe Microscopy,” | Kuang-Yuh Huang, En-Te Hwu, Shao-Kang Hung, and Ing-Shouh Hwang | SPS'06/SPSTM-1 | Hamburg, Germany |
| 2006 | “New Optical scheme for Monitoring Three-Dimensional displacement of Probe in Atomic Force Microscope,” | En-Te Hwu, Kuang-Yuh Huang, Shao-Kang Hung, and Ing-Shouh Hwang | IMC16, | Sapporo, Japan |
| 2005 | “Design and Experiment of Range-Extended Fiber Fabry-Perot Interferometer Utilizing the Second Harmonic Displacement Modulation,” | Shao-Kang Hung, En-Te Hwu, Mei-Yung Chen, Li-Chen Fu | Proceedings of International Conference on Advanced Intelligent Mechatronics (EI), | |
| 2005 | “Backstepping Controller Design for a Planar Maglev Positioning System,” | Mei-Yung Chen, Shao-Kang Hung, Li-Chen Fu | Proceedings of International Conference on Advanced Intelligent Mechatronics (EI) | |
| 2005 | “Postfitting Control Scheme for Periodic Piezoscanner Driving,” | Shao-Kang Hung, En-Te Hwu, Ing-Shouh Hwang, and Li-Chen Fu | STM'05/ICSPM, Conference | Sapporo, Japan |
| 2005 | “Measurement of the Cantilever Displacement Using a CD/DVD Pickup Head,” | En-Te Hwu, Kuang-Yuh Huang, Shao-Kang Hung, and Ing-Shouh Hwang | STM'05/ICSPM | Sapporo, Japan |
| 2005 | “Automatic Probe Alignment for Atomic Force Microscope,” | Shao-Kang Hung, Chia-Feng Tsai, Yu-Po Hsu, Dai-Jie Tzou, Meng-Hu Lin, and Li-Chen Fu | Proceedings of International Conference on Mechatronics (EI), | |
| 2005 | “Optical Pickup System for Measuring the Displacement of the Micro Cantilever in Scanning Probe Microscope,” | Kuang-Yuh Huang, En-Te Hwu, Hsin-Yi Chow, and Shao-Kan Hung | Proceedings of International Conference on Mechatronics (EI), | |
| 2004 | “Novel Three-Dimensional Beam Tracking System for Stationary-Sample Type Atomic Force Microscopy,” | Shao-Kang Hung, Ing-Shouh Hwang, and Li-Chen Fu, | Proceedings of Instrumentation and Measurement Technology Conference (EI), |
| Year | Award Name | Awarding Unit | Honor Category |
|---|---|---|---|
| 2007 | CACS Internation Automatic Control Conference, Best Paper Award | Chinese Automatic Control Society | Outside School Honors |
| 2006 | Long-term Smile Contest, 2nd Prize | Acer / China Times | Outside School Honors |
| 2005 | CACS Internation Automatic Control Conference, Student Paper Contest, Exceptional Award | Chinese Automatic Control Society | Outside School Honors |
| 2003 | Student Hands-on Project Contest, 1st Prize | Ministry of Education | Outside School Honors |
NCTU ME