Yao-Hsien Liu
Core
Name Yao-Hsien Liu
Office Tel No. 035712121-55136
Email yhliu@nctu.edu.tw
Title Professor
Phone 886-3-5712121 Ext.55136
Office Room 464, Eng. Building 5
Web Page https://sites.google.com/nctu.edu.tw/yhliulab
Laboratory Room 342, Engineering Building 5
Division Energy-Thermofluids Engineering
Teaching Area Thermodynamics, Heat Transfer, Heat Convection, Gas Turbine Cooling Technology, Experimental Methods in Heat Transfer and Fluid Mechanics
Research Expertise Heat transfer enhancement, experimental methods in heat transfer and fluid mechanics, flow and temperature study in semi-conductor devices, energy systems
Country School Name Department Degree Duration
USA Text A&M Uinversity Department of Mechanical Engineering Ph.D. 2005.08 ~ 2008.12
USA Text A&M Uinversity Department of Mechanical Engineering M.S. 2003.08 ~ 2005.08
Taiwan National Taiwan University Department of Mechanical Engineering B.S. 1998.09 ~ 2002.06
Organization Title Department Job Title Duration
Nation Chiao Tung University Department of Mechanical Engineering Associate Professor 2014.08 ~ Up to today
2009.08 ~ 2014.07
National Taiwan University Department of Mechanical Engineering Research Assistant 2002.12 ~ 2003.06
Year Project Title Participator Job Title Period Unit
2017 Enhancing Mist Cooling and Water Collecting Efficiency Using Mechanically and Biomimetically Modified Surface Yao-Hsien Liu PI 2017.08 ~ 2018.07 MOST
2016 Investigation of Dual Circular Laser Beam and Powder Deposition Rate in LMD Process Yao-Hsien Liu PI 2016.05 ~ 2016.12 Industrial Technology Research Institute
2016 Investigation of Thermal Management of Cloud Computing Yao-Hsien Liu CO-PI 2016.01 ~ 2016.12 MOST
2016 Development and Design of Materials, Components and Fabrication Processes in IGFC for the Utilization of CO2 and Syngas (3/3) Yao-Hsien Liu CO-PI 2016.01 ~ 2016.12 MOST
2015 Heat Transfer with Mist Flow in Mini Channels Yao-Hsien Liu PI 2015.08 ~ 2016.07 MOST
2015 Heat Transfer Simulation of a Direct Laser Deposition Process Yao-Hsien Liu PI 2015.05 ~ 2015.12 Industrial Technology Research Institute
2015 Flow and Heat Transfer Enhancement Study with Ultrasonic Atomization Yao-Hsien Liu PI 2014.08 ~ 2015.07 MOST
2012 Effect of Thermal Radiation and Ocean Waves on the Performance of the Wave Power Generator Yao-Hsien Liu PI 2013.01 ~ 2013.12 NSC
2012 Heat Transfer Enhancement of Mist Flow in Channels with High Heat Flux Components Yao-Hsien Liu PI 2012.08 ~ 2014.07 NSC
2012 Cooling system design and analysis of the wave power generator Yao-Hsien Liu PI 2012.04 ~ 2012.11 IRTI
2011 Flow field, temperature field, and thermal stress analysis of solar cell annealing chamber Yao-Hsien Liu PI 2011.09 ~ 2012.10 Sunshine-PV
2011 Improvement Study on the Thermal Fluid Distribution due to Effect of Rotation in the LED Epitaxial Process Yao-Hsien Liu PI 2011.08 ~ 2012.07 NSC
2011 Flow Visualization of MOCVD Chamber - ITRI Yao-Hsien Liu 2010.09 ~ 2012.07 ITRI
2009 Composite cooling technology for heat transfer and pressure drop within the cooling channel Yao-Hsien Liu Principle investigator 2009.10 ~ 2010.09 National Science Council
Year Paper Title Authors Journal Title Issue.No
2018 Paper List of Yao-Hsien Liu Prof. on MOST website
2018 Heat Transfer of Impinging Jet Arrays onto Half-smooth, Half-rough Target Surfaces Lo, Y.H., Liu Y.H. Applied Thermal Engineering
2017 Heat Transfer Measurement in a Rotating Cooling Channel with Staggered and Inline Pin-fin Arrays Using Liquid Crystal and Stroboscopy Huang, S.C., Wang, C.C., Liu, Y.H. International Journal of Heat and Mass Transfer
2017 Heat Transfer in Rectangular Channels with Porous Wire Mesh under Impinging Jet Conditions Sung, H.C, L, Y.H. International Journal of Thermal Sciences
2017 Flow Field Investigation in a Rotating Disk Chemical Vapor Deposition Chamber with a Perforated Showerhead Liu, Y.H., Peng, G.J., Lai, W.C., Huang, C.Y., Liang, J.H. Experimental Thermal and Fluid Science
2017 Nonboiling Heat Transfer and Friction of Air/Water Mist Flow in a Square Duct With Orthogonal Ribs Huang, Y.H., Chen, C.H., Liu, Y.H. ASME Journal of Thermal Science and Engineering Applications
2016 Heat Transfer Enhancement of an Impinging Synthetic Air Jet using Diffusion-shaped Orifice Liu, Y.H., Chang, T.H., Wang, C.C. Applied Thermal Engineering
2016 Natural Convection in an Oscillating Cylindrical Enclosure with Pin-fins Hsu, H.J., Huang, Y.H., Liu, Y.H. International Journal of Heat and Mass Transfer
2016 Heat Transfer and Friction in a Square Channel with Ribs and Grooves Liu, Y.H., Lo, Y.H., Li, X.X., and Huh, M. AIAA Journal of Thermophysics and Heat Transfer
2015 Effect of Driven Frequency on Flow and Heat Transfer of an Impinging Synthetic Air Jet Liu, Y.H., Tsai, S.Y., Wang, C.C. Applied Thermal Engineering
2013 Particle Image Velocimetry Measurement of Jet Impingement in a Cylindrical Chamber with a Heated Rotating Disk Liu, Y.H., Tseng, L.W., Huang, C.Y., Lin, K.L., Chen, C.C. International Journal of Heat and Mass Transfer
2013 Jet Impingement Heat Transfer on Target Surfaces with Longitudinal and Transverse Grooves Liu, Y.H., Song, S.J, and Lo, Y.H. International Journal of Heat and Mass Transfer Issue 1-2
2013 High Rotation Number Effect on Heat Transfer in a Leading Edge Cooling Channel with Three Channel Orientations Huang, S.C. and Liu, Y.H. ASME Journal of Thermal Science and Engineering Applications
2012 High Rotation Number Effects on Heat Transfer in a Ribbed Wedge-Shaped Channel with Slot Ejection Yao-Hsien Liu, Michael Huh, Je-Chin Han International Journal of Heat and Fluid Flow Issue 1
2012 Heat Transfer Augmentation in Rotating Triangular Channels with Discrete and V-Shaped Ribs Liu, Y.H., and Lai, S.Y. AIAA Journal of Thermophysics and Heat Transfer Issue 4
2012 High Rotation Number Effect on Heat Transfer in a Trailing Edge Channel with Tapered Ribs Liu, Y.H., Huh, M., and Han, J.C. International Journal of Heat and Fluid Flow 1
2011 Heat Transfer in Trailing Edge Wedge-Shaped Pin-Fin Channels with Slot Ejection under High Rotation Numbers Akhilesh P. Rallabandi, Yao-Hsien Liu and Je-Chin Han ASME Journal of Thermal Science and Engineering Applications Issue 2
2011 High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two-Pass Channel Michael Huh, Jiang Lei, Yao-Hsien Liu and Je-Chin Han April 2010 ASME Journal of Turbomachinery Issue 2
2010 High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45 deg, Inverted 45 deg, and 90 deg Ribs Yao-Hsien Liu, Michael Huh, Je-Chin Han and Hee-Koo Moon ASME Journal of Heat Transfer Issue 7
2009 Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers Yao-Hsien Liu, Michael Huh, Dong-Ho Rhee, Je-Chin Han and Hee-Koo Moon ASME Journal of Turbomachinery Issue 4
2009 Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels with Slot Ejection under High Rotation Numbers Yao-Hsien Liu; Michael Huh; Lesley M. Wright; Je-Chin Han AIAA Journal of Thermophysics and Heat Transfer No. 2
2009 Effect of Rib Height on Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) with a Sharp Entrance at High Rotation Numbers Michael Huh, Yao-Hsein Liu, Je-Chin Han International Journal of Heat and Mass Transfer Issue 19-20
2009 Rib Spacing Effect on Heat Transfer in Rectangular Channels at High Rotation Numbers Michael Huh; Yao-Hsein Liu; Je-Chin Han; Sanjay Chopra AIAA Journal of Thermophysics and Heat Transfer No. 2
2008 “Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Numbers,” Yao-Hsien Liu, Michael Huh, Je-Chin Han and Sanjay Chopra ASME Journal of Heat Transfer Issue 8
2008 “Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels under High Rotation Numbers,” Lesley M. Wright, Yao-Hsien Liu, Je-Chin Han and Sanjay Chopra ASME Journal of Heat Transfer Issue 7
2007 “Rib Spacing Effect on Heat Transfer in Rotating Two-Pass Ribbed Channel (AR=1:2),” Yao-Hsien Liu; Lesley M. Wright; Wen-Lung Fu; Je-Chin Han AIAA Journal of Thermophysics and Heat Transfer, No. 3
Year Paper Title Authors Conference Name Location
2017 Liquid Crystal Measurement of Heat Transfer in a Rotating Cooling Channel with Partial Pin-fins Wang, C.C., Huang, S.C., Liu, Y.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2017 Numerical Simulation for Laser Melting Process on the Steel Substrate Huang, Y.Y., Liu, Y.H., Huang, K.Y. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2017 Effect of Missing Fin on Endwall Heat Transfer in a Rotating Cooling Channel Huang, S.C., Wang, C.C., and Liu, Y.H. ASME Turbo Expo 2017 Charlotte, NC, USA
2016 Non-boiling Heat Transfer of Air/Water Mist Flow in a Square Duct with Orthogonal Ribs Huang, Y.H., Chen, C.H., and Liu, Y.H. ASME Summer Heat Transfer Conference Washington DC, USA
2015 Numerical Simulation for a Phase Change Problem during Laser Melting Process Liu, Y.H., Huang, W.C., Tsai, T.W., Chuang, C.S., Liu, S.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2015 Thermal Management of Data Center Racks Considering Server Arrangement Sung, H.C., Chang, S.K., Liu, Y.H. 3rd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control Taipei, Taiwan
2015 Impingement Cooling in a Simulated Data Center Servers with an Array of Elliptic Air Jets Chang, S.K., Lo, Y.H., Liu, Y.H. ASME 2015 InterPACK San Francisco, California, USA
2014 Droplet Size Characterization for Mist Flow in a Single-Side Heated Vertical Square Duct Liu, Y.H., Lin, C.C., and Chen, C.H. 2014 4th Joint US-European Fluids Engineering Division Summer Meeting Chicago, Illinois, USA
2013 Heat Transfer and Flow Characteristics of Synthetic Jet Impingement Cooling Liu, Y.H., Tasi, S.Y., and Wang, C.C. 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control Xi’an, China
2013 Flow Patterns in a Multiple Impinging Jets CVD Reactor with a Rotating Substrate Lai, K.F., Liu, Y.H., Huang, C.H., and Wang, C.C. The 19th American Conference on Crystal Growth and Epitaxy Keystone, Colorado, USA
2013 Heat Transfer Measurement in a Rotating Two-pass Rectangular Channel with 45º Angled Ribs and Grooves using Transient Liquid Crystal Technique Huang, S.C, Yen, C.W., and Liu, Y.H. Proceedings of 12th Asian Symposium on Visualization Tainan, Taiwan
2012 Cooling Technology Research of the Gas Turbine Engine in a Solid Oxide Fuel Cell System for Combined Heat and Power Generation Wang, C.S., Feng, J.S., and Liu, Y.H. 2012 Taiwan Symposium on Carbon Capture, Storage and Utilization(2012 CCSU) Taipei, Taiwan
2012 Transient Liquid Crystal Measurement of Heat Transfer in a Rotating Rectangular Channel with the Entrance Geometry of Sudden Contraction, Wang, C.S., Lin, Y.S., and Liu, Y.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2012 Effect of Angled Grooves on Heat Transfer in an Impingement Channel with Cross-flow, Lo, Y.H., and Liu, Y.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2012 High Rotation Number Effect on Heat Transfer in a Leading Edge Cooling Channel with Three Channel Orientations, Huang, S.C. and Liu, Y.H. ASME Turbo EXPO, GT-2012-68389 Copenhagen, Denmark
2012 Investigation of Substrate Rotation on the Flow Field in a Chemical Vapor Deposition Chamber Using Particle Image Velocimetry, Tseng, L.W., Wang, C.S., Liu, Y.H., Wang, C.C., Huang, C.Y., Chen, C.C., Lin, K.L. 24th International Cryogenic Engineering Conference Fukuoka, Japan
2011 Heat Transfer Characteristics of Jet Impingement on a Target Surface with Grooves, Lo, Y.H., Song, S.J., and Liu, Y.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2011 High Rotation Number Effect on Heat Transfer in a Triangular Channel with Discrete V-shaped Ribs, Wang, C.S, Lin, Y.S., and Liu, Y.H. International Conference on Flow Dynamics Sendai, Miyagi, Japan
2010 High Rotation Number Effects on Heat Transfer in a Pin-Fin Roughened Wedge-Shaped Trailing Edge Channel with Slot Ejection,” Rallabandi, A.P., Liu, Y. H., and Han, J. C., ASME Turbo EXPO, GT-2010-22832 Glasgow, United Kingdom
2009 Heat Transfer and Pressure Drop in a Triangular Channel with 45°, Inverted 45°, and 90° rib under High Rotation Numbers, Liu, Y.H., Huh, M., Han, J.C., and Moon, H.K ASME Turbo EXPO, GT-2009-59216 Orlando, Florida, USA
2009 High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two Pass Channel,” Huh, M., Lei, J., Liu, Y. H., and Han, J. C ASME Turbo EXPO, GT-2009-59421 Orlando, Florida, USA
2008 Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels with Slot Ejection under High Rotation Numbers, Liu, Y.H., Huh, M., Wright, L.M., and Han, J.C., ASME Turbo EXPO, GT-2008-50343 Berlin, Germany
2008 Effect of Rib Spacing on Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) with a Sharp Entrance at High Rotation Numbers, Huh, M., Liu, Y.H., Han, J.C., and Chopra, S. ASME Turbo EXPO, GT-2008-50311 Berlin, Germany
2008 Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers,” Liu, Y.H., Huh, M., Rhee, D.H., Han, J.C., and Moon, H.K ASME Turbo EXPO, GT-2008-50344, Berlin, Germany
2007 Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels under High Rotation Numbers, Wright, L.M., Liu, Y.H., Han, J.C., and Chopra, S., ASME Turbo EXPO, GT-2007-27093 Montreal, Canada
2007 Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Numbers, Liu, Y.H., Huh, M., Han, J.C., and Chopra, S ASME Turbo EXPO, GT-2007-27067, Montreal, Canada
2006 Rib Spacing Effect on Heat Transfer and Pressure Loss in a Rotating Two-Pass Rectangular Channel (AR=1:2) with 45-Degree Angled Ribs Liu, Y.H., Wright L.M., Fu, W.L., and Han, J.C ASME Turbo EXPO, GT-2006-90368 Barcelona, Spain